Webcam FTP Service can easily turn your webcam into a cloud-based security camera. Compared with other security or surveillance systems, this service is extremely easy to setup, the cost is dramatically lower. It is also more secure as it saves images to the CameraFTP.com secure data center. You can monitor the scene live or play back recorded images from anywhere.
Security cameras, also known as surveillance cameras, are used to monitor homes, businesses, and other types of properties. Typically, they are connected to a recording device such as a tape recorder or a disk. In the last few years, IP-based security cameras have become increasingly popular. Security cameras enable you to remotely monitor a scene and play back recorded images.
Analog Closed-Circuit Television cameras record pictures or videos as analog signals. Most of old surveillance cameras are analog cameras. This type of camera records directly onto a video tape recorder. In order to save recordings to a PC, the analog signal must be converted to a digital format; this can be done with a video capture card.
Digital CCTV cameras directly capture images and videos as digital signals. The signals are compressed and encoded into a standard video format such as MPEG. Digital CCTV cameras usually record videos onto a hard drive or a storage server.
A security camera system or a surveillance system is basically a series of security cameras connected to a monitor and recording system. Most of security camera systems are CCTV-based with the cameras connected to the recording system via video cables. A multi-channel security camera system is dramatically more expensive than a regular IP camera; security camera systems from different vendors require different cameras. Using IP-based network cameras, you don't need a security camera system as each network camera can connect to the cloud directly.
An Internet Protocol camera or network camera is a type of digital video camera that can send and receive data via a computer network. This type of camera has become increasingly popular among homeowners and business owners in the last few years because of steep price drop. A webcam can also be considered as a network camera because it can send or receive data via a computer.
Security cameras themselves are not completely secure. They can fail due to dust, smoke, fog, loss of power, or damage. They are also easily susceptible to tampering. If a security camera records data onsite, both the camera and the recorded data can be destroyed – by intruders, burglars, or anyone else who wants the data gone forever.
Many security cameras now support motion detection - a technology that triggers recording only when something changes in the scene. Motion can be detected by image changes or sound changes. Many security cameras can only detect image changes. As minor scene changes can occur due to events such as natural light changes or wind changes, many security cameras allow you to configure a “threshold”. By setting a higher threshold, minor scene changes will be ignored and only scene changes that reach the “threshold” will be recorded. Motion detection is very useful if you want to significantly reduce bandwidth and storage usage.
One of the main usages of a security camera is to monitor night-time scenes. If the scene is not well lit, it is recommended that you use a camera with night vision capability. Those cameras use an infrared spectrum of light at night and can take pictures of objects in the dark.
Wireless security cameras transmit video and audio signals wirelessly to a receiving device. There are analog and digital types of wireless cameras. Digital security cameras have become much more popular recently because they can be accessed over the Internet.
FTP cameras are a type of IP cameras that support uploading of recorded images and videos to an FTP server. Almost all modern IP cameras support FTP upload. FTP offsite storage is by far the most popular way to store image and video files from a security camera.
All security cameras are video cameras. Most security cameras support real-time monitoring via a web browser within the same network. From the Internet, it requires more complicated network configuration. Some security cameras can store video files to a network file server within the same network. Almost all security cameras can upload image snapshots to an FTP server, but very few security cameras can upload video clips to an FTP server. This is because uploading video files requires much higher bandwidth and storage space. CameraFTP supports video clips if your security camera supports it.
Most security camera systems can store recorded images and videos to a tape, hard drive, or onsite storage server. However, storing data in this manner leaves it susceptible to tampering and damage by intruders. For better protection and security, offsite storage is the best solution.
The required amount of storage is dependent on your camera’s image resolution, frame rate, compression ratio and days of retention. Setting up your camera to use motion detection can significantly reduce storage usage.
Security cameras can generate a large amount of data. The amount depends on the compression ratio, images captured per second, and image size. Most cameras provide a limited amount of storage space; therefore, recordings are usually kept for a preset amount of time before being overwritten by new images.
An analog security camera usually supports PAL (768x576 Pixels) or NTSC (720x480 pixels) format. A digital security camera can support many different image resolutions, e.g. 320x240, 640x480, 800x600, 1280x960, and more.
While the resolutions of still image cameras can go as high as 10 million pixels, for a video surveillance camera, the standard resolution is 320x240 or 640x480. The main reason probably is because of storage and bandwidth requirement. The higher the resolution, the more storage space and the more bandwidth it requires. If you set the resolution to higher than 640x480 and if you have multiple cameras, you might run out of upload bandwidth if you use ADSL or Cable Modem connections.
Offsite recording addresses one of the biggest vulnerabilities of a security camera. Instead of storing recorded data onsite, recorded images are uploaded to Camera FTP server in real-time. Even if an intruder destroys a security camera, he cannot destroy the recorded data, which can be immensely helpful for tracking down the intruder.
Once a security camera uploads the recorded images to Camera FTP server, you can play back the recorded images from anywhere using CameraFTP’s Viewer App or CameraShow feature. The CameraShow feature is a browser-based feature and works on PC, MAC, tablets and even smart phones.
Camera FTP supports real-time viewing of a scene using the CameraShow feature. Many IP cameras can support real-time viewing; however, such feature usually only works at the same location. With Camera FTP service, you can view images over the internet from anywhere using any devices.
CameraFTP offers a revolutionary security and monitoring service for home and business users. Compared with traditional security services, it has a lot of advantages. It is extremely easy to setup, does not require any expensive hardware, requires no professional installation, and the cost is extremely low. Moreover, it is more secure than regular security services as it supports Cloud Recording and Playback.
Your IP camera should have a web-based configuration wizard where you can enter ftp.cameraftp.com as the FTP server. The FTP port number is the default port number 21. For username and password, put your CameraFTP.com username and password. Please note that accounts on cameraftp.com are not the same as accounts on DriveHQ.com. Your DriveHQ username and password will not work on CameraFTP.com.